Polyurethane Water Hose-manufacture,factory,supplier from China

1, Field inspection: polyurethane insulation and waterproof materials with twofold performance, after the material into the field, the raw materials must be retested, spray polyurethane retest content is mainly for the density of the material, compression properties, dimensional stability, impermeability and so on.2, Waterproof performance check: using water or rain to check its waterproof effect, there shall be no water and water seepage phenomenon.3, Spraying thickness check: the use of steel needle insertion and measurement methods to check the thickness.4、Surface flatness check: using 1m r

PVC Hose and rubber water pipe each have their advantages and disadvantages, can not simply say which one is better, but according to the specific use scenario and needs to choose.Advantages of PVC Hose:The price is relatively low and economical.Good corrosion resistance, can resist the erosion of a variety of chemical substances.High hardness, not easy to deformation, more stable after installation.Advantages of rubber water pipe:Excellent flexibility, easy bending and twisting, suitable for complex installation environments.It has good shock absorption and buffer performance.Low temperature

First, the characteristics of polyethylene plastic water pipe and the use of precautionsPolyethylene plastic water pipe is a commonly used water pipe material with the following characteristics:1. light weight: compared with metal pipes, polyethylene plastic water pipe is light weight, easy to construct and install.2. good corrosion resistance: polyethylene plastic water pipe is not easy to be corroded, long service life.3. high pressure resistance: polyethylene plastic water pipe has good pressure resistance, can withstand a certain water pressure. 4.

1 - detergent cleaning method: the mixture of detergent in warm water into the plastic tube, the liquid accounted for a quarter to one-third of the volume of the tube is more appropriate, closed at both ends, shaking vigorously, large plastic pipe can be used to clean the way mechanical vibration. After 20 minutes to half an hour, release the liquid and rinse repeatedly with water.

Cleaning1) Clean the hose for 20 minutes with hot water or a detergent solution at +50°C to +65°C; in any case the temperature must be above +43°C. The hose must be cleaned with hot water.This cleaning process helps to remove food residues from the hose.2) If detergent is used for cleaning, the hose must be washed again with water to ensure that any residues of detergent are removed. It is recommended that this procedureThe temperature of the hot water during the cleaning process should be between +50°C and +65°C.

The installation of the Polyurethane Hose requires following certain steps to ensure a solid and reliable connection. The following are the basic guidelines for installing the Polyurethane Hose:1. Prepare tools and materialsFirst, prepare special cutting tools, quick joints, pipe clamps or bindings, cleaning supplies (such as alcohol cotton balls), and measuring tools (such as tape measures).2. Measurement and cuttingAccording to the actual connection distance, use a tape measure to measure the required PU pipe length, and mark the cutting position on the pipe.

The Polyurethane Hose demonstrates significant advantages over the rubber hose in a number of key performance indicators. First of all, in terms of wear resistance, Polyurethane Hose, with its special material formulation and manufacturing process, can generally resist friction and wear for a longer time, ensuring the stability and reliability of the pipeline in long-term use.

Cleaning1) Wash the hose with hot water or detergent solution for 20 minutes at a temperature of +50°C to +65°C; in any case, the temperature must be higher than +43°C.This cleaning process helps to remove food residues from the hose.2) If cleaning agents are used for cleaning, the hose must be washed again with water to ensure that any residual cleaning agent is removed. It is recommended that this procedureThe temperature of the hot water during the cleaning process should be between +50℃ and +65℃.

Polyurethane Hose plastic material is subject to changes in its physical properties during its service life due to certain factors. Even reinforcing layers (polyester fibre layers or spiral steel), they can be affected by different factors, especially when stored incorrectly.

Polyurethane hose manufacturers talk to share wear-resistant polyurethane hose how to choose? Polyurethane hose fits each other. Various mechanical equipment to inhale and transport solid particles of dust with destructive force, such as woodworking equipment dust removal, ceramic equipment raw material transport.