Reinforced Plastic Tubing-manufacture,factory,supplier from China

(Total 24 Products for Reinforced Plastic Tubing)
Product Description:Industrial Plastic Tubing is piping equipment widely used in industrial production and processing, usually made of plastic materials such as polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), etc. They are used to transport a variety of liquids and gases, including water, oil, acids, alkalis, chemicals, and so on. They are used to convey a variety of liquids and gases including water, oil, acids, alkalis, chemicals, etc.
  Contact Now
Product Description:Flexible PVC Tubing is made of plastic. The main component of PVC is polyvinyl chloride, adding other components to enhance its heat resistance, toughness, ductility of a material. The top layer of this surface film is lacquer, the main component in the middle is polyvinyl chloride, and the bottom layer is backcoated adhesive.
  Contact Now
Product DescriptionThe following points should be noted when installing and using Polyurethane Tubing:1. Pre-installation inspection: before installing the Polyurethane Tubing, the connecting parts of the pipelines should be carefully checked to ensure that the connection of the pipelines is smooth, clean and free of debris, and that the pipelines are tightly connected to prevent water leakage.2. Avoid distortion and extrusion: When installing PU pipe, avoid excessive distortion or extrusion of the pipe, so as not to affect the normal service life and performance of the pipe.3.
  Contact Now
Product Introduction:Color: Crystal clear, reinforced with an ivory colored rigid skeleton.Temperature range: approx. -20°C to +80°C, for short periods approx. +120°C.Application: anti-abrasive protection hose, usually used in suction applications, especially for abrasive solids such as dust, powders, filaments, crumbs and granules; used for gaseous and liquid media, industrial dusting and suction, industrial vacuum cleaners, suction of paper or textile fibers, as an anti-abrasive protection hose.
  Contact Now
TPU plastic reinforced hose seriesAdvantage:The inner wall of the hose is flat and does not accumulate dust, it is not easy to be damaged by frequent dragging on the ground, it can withstand a certain amount of pressure and can be restored to its original state after the external force is removed.Material and Characteristics:It is made of PU material imported from Germany BASF, and the reinforcement is made of high-strength synthetic plastic, which has good elasticity and wide temperature range.
  Contact Now
Product introductionProduct name: Pu Plastic Reinforced HoseSize: 25-300MMTemperature: -40° C +90 ° CWall thickness: 0.6-2.5MM customizableStructure: polyurethane coated spiral plastic reinforced copper wire windingProduct descriptionPU Plastic Reinforced Hose is a flexible pipe made of polyurethane material, usually equipped with spiral or ring-shaped reinforcement ribs inside to provide additional support and structural strength.
  Contact Now
Product DescriptionTemperature range:-40°C~125°C(short time up to +150°C)Structure: smooth inner wall, transparent tube wall, outer spiral reinforced; wall: platinum silicone; outer spiral reinforced structure.Characteristics: Smoothness, acid and chemical resistance, bending radius equal to the outer diameter.Product Specification:     Inner Diameter(mm)、External Diameter(mm)、Over Pressure(bar), Vacuum(bar),  Bend Radius(mm),      Weight(kg/m)Product Pictures:
  Contact Now
Product Model:XY-0214 HoseProduct name: PVC plastic reinforced hose (round bone reinforced)Material: PVC, the appearance of the round bone spiral skeleton reinforcementColour: Grey is the standard colour, transparent, black and other colours can be ordered.Temperature range: -5℃~80℃ (short time up to +100℃)Characteristics: smooth surface luster, easy to bend, pressure resistance is not easy to deform, acid and alkali resistance, high temperature resistance, not easy to freeze and crack anti-agingSpecification: Inner diameter φ25-250, length is not limited.Uses: used for medical equipment to we
  Contact Now
Product Description.Copper Wire Anti-Static Plastic Reinforced HoseApplications:Aspiration of dust, wood flour, shaving, powder, gas and smoke, textile, plastic, printing, ceramic, fixture and wood industries, shavings, exhaust, chemical industry, paint industry, oil fog exhaust, machinery manufacturing.For mild solids transport and air and gas transport.
  Contact Now
Food-grade polyether-type polyurethane wall, reinforced with shockproof rigid plastic PVC spiral ribs, with smooth inner wall and spiralled raised outer surface. Lightweight, abrasion-resistant and very good resistance to twisting. The abrasion-resistant hose has good mechanical properties and is resistant to most chemicals.
  Contact Now
Product Description:Clear Blue Reinforced PVC Hoses is a high performance plastic hose, widely used in medical, food and beverage, pharmaceutical, chemical, agricultural irrigation and other fields.
  Contact Now
Product Description:In the industrial or agricultural field, Spiral Reinforced Hose has many applications, with a series of characteristics such as corrosion resistance, easy to bend and fold, which is deeply loved by the majority of friends. Spiral Reinforced Hose combines the lightness of plastic and the function of steel wire fixed coil, making Spiral Reinforced Hose provide more convenient service for everyone.
  Contact Now
Product Introduction:Material Tube wall: polyurethaneSpiral reinforcement PC polycarbonateTemperature range of anti-static hose: approx. -30°C to +100°C, up to +120°C for short periods.Specification; 19-300MMWall thickness 0.6~3mm, (special models can be customised)Colour: translucent, rigid spiral reinforced  Product Specification:     Inner Diameter(mm)、External Diameter(mm)、Over Pressure(bar), Vacuum(bar),  Bend Radius(mm),      Weight(kg/m)Product Pictures:Company Profile:Ningjin Rui Ao Plastic Hose Products Co., Ltd.
  Contact Now
Product DescriptionsPolyurethane, often abbreviated as PU, PUR or TPU ('thermoplastic polyurethane'), combines the best properties of plastic and rubber.It is ideally suited for use in dry only environments, for drawing in and transporting dust, debris and abrasive particles such as wood waste, as well as for general industrial and agricultural applications.Polyurethane (PU) is a thermoplastic material for many application components that can be processed into different shapes such as tubing, various types of polyurethane pipes and hoses.
  Contact Now
Product DescriptionAir Plastic Hose is a kind of transmission hose widely used in industry, with excellent pressure resistance, wear resistance, oil resistance and other properties. It is made of high quality synthetic rubber and reinforced layer material, which can withstand the transmission of high pressure gas, while having good wear resistance. In addition, Air Plastic Hose materials also have good oil resistance, and can stably transfer gases and liquids in machining, painting and other fields.Air Plastic Hose has the following characteristics:1.
  Contact Now
Product DescriptionName: plastic reinforced hoseMaterial: polyurethane (PU), polycarbonate (PC)Structure: polyurethane cover, spiral reinforcement, smooth inner wall Temperature range: -30° +90° (short time up to 120°)Inside diameter:$25mm-t 300mmWall thickness:$0.6mm-4 2mmPerformance: Compared with steel basket and rubber hose, it has the advantages of light weight, high pressure, high efficiency, soft counter-ground, coilable, easy to operate, fast speed of laying and withdrawing, manoeuvrable and flexible, strong adaptability to the environment, safe and reliable use and durability, etc.
  Contact Now
Product Description:The manufacturing process and material selection of Corrugated Plastic Pipes have an important impact on their performance and application scenarios. Here are some common manufacturing processes and material choices as well as their characteristics and application scenarios:Manufacturing process:Extrusion: One of the most common methods in the manufacture of Corrugated Plastic Pipes.
  Contact Now
Product Description Smooth, very strong and soft inside. High strength against mechanical fatigue, resistant to ageing and against most chemicals.
  Contact Now
Product Description:Heavy Duty Wire Reinforced Hose, also known as steel wire reinforced hose, has a unique three-layer structural design that gives it exceptional performance. The inner and outer layers are made of high-quality PVC soft plastic, while the middle is a strong wire reinforced structure, which can be dense wire mesh or spiral wire. This structural design makes the pipe have a variety of titles, such as wire pipe, wire reinforced pipe, wire spiral reinforced pipe, wire mesh reinforced hose and PVC wire mesh hose.
  Contact Now
Product DescriptionMaterial: Tube wall: polyurethane.Spiral reinforcement: PC polycarbonateTemperature range of anti-static hose: about -30 ° c to +100 ° c, short time up to +120 ° cSpecification; 19-300MMWall thickness 0.6~3mm, (special models can be customized)Color: translucent with rigid spiral reinforcement  Product Specification:     Inner Diameter(mm)、External Diameter(mm)、Over Pressure(bar), Vacuum(bar),  Bend Radius(mm),      Weight(kg/m)Product Pictures:Company Profile:Ningjin Rui Ao Plastic Hose Products Co., Ltd.
  Contact Now
Product Performance: Colour: transparent Spiral reinforced layerTemperature range: -40 / +90  (It can reach 120 in a short time)Characteristics: PU hose with vibration-proof rigid PU spiral.Reinforcement: PU hose with shockproof rigid pu spiral reinforcement.Inner wall made of food-grade abrasion-resistant PU material.   Smooth, light, flexible and rugged inner surface.   Resistant to weathering, mechanical fatigue and most chemicals.Application: pumping and transporting liquid foodstuffs (including oily foodstuffs).   Conforms to EU EC standards fo
  Contact Now
Product DescriptionName: plastic reinforced hoseMaterial: Polyurethane (PU), Polycarbonate (PC)Configuration: Polyurethane covered, spiral reinforcement, smooth inner wall of the tubeThe temperature range: -30 ° + 90 ° (short time up to 120 °)Inner diameters: ¢25mm-¢300mmWall thickness: ¢0.6MM-¢2mm    Performance: 1. Airtight, chemical resistance, high wear resistance, positive and negative pressure resistance, strong support, shockproof.2. The inner wall is completely smooth making the material flow in the hose smoothly.3.
  Contact Now
product detailsProduct Name: PU plastic rib reinforced hose, food grade plastics hose, the food-grade hoseFood-grade polyether polyurethane wall with shockproof rigid plastic PVC spiral rib reinforcement, smooth inner wall and spiral raised on the outer surface. Lightweight, wear and anti-twist performance is very good. Abrasion resistant hose with good mechanical performance, resistant of most chemicals.
  Contact Now
Product Description:Clear Bendable Plastic Tubes are a common industrial material that has good transparency and flexibility and can be bent into different shapes as needed.
  Contact Now
Relate News
Plastic Tubing is widely used, and its diversified functions make it play an indispensable role in many fields.
Article source:admin Time:2022-12-13 09:09:28The pu plastic reinforced hose is made of polyurethane material imported from Germany. pu, also known as polyurethane, is a plastic material with the best abrasion resistance. Plastic reinforced hose made of pu material is wear-resistant, hydrolysis-resistant, mould-proof and aging-resistant. Widely used for abrasive solids such as dust, powder, fibre, chips and granules, gas and liquid environments, dust removal and vacuuming workshops, industrial hoovers, paper and textile fibres.
With the development of the times, the advancement of technology, and the improvement of people's demand for quality of life, many enterprises are facing overall reform and transformation to adapt to today's society. Especially in some industries related to food and health and safety, this is a huge challenge. Simply put, the transportation of liquid food must be plasticizer-free, non-toxic and odorless. This situation requires food grade steel wire tubing to meet the requirements. So how do you choose food grade steel tubing?
How do you cut a steel reinforced hose? The following steps and tools can be used to cut steel hose:1. Prepare tools: Angle grinder or special steel pipe cutter can be used to cut the steel bar hose. In addition, safety gloves, goggles and other personal protective equipment are required.2. Measurement mark: Use a ruler or ruler to mark the length to be cut on the steel hose to ensure accuracy.3. Fixed hose: Fix the steel hose on the workbench or a suitable fixture to ensure that it will not move during the cutting process.4.
There are many types of hoses, here are some common types:Rubber hose: has good elasticity and flexibility, can adapt to a certain degree of bending and stretching. Often used to transport water, oil, gas and other media, such as automotive brake tubing and cooling water pipes.Plastic hoses: such as PVC hoses, light weight, corrosion resistance, often used in household drainage and irrigation systems.Metal hose: generally made of stainless steel and other metals, with high strength and high pressure resistance.
As a food safety delivery of commonly used steel wire hose,food grade hose,food grade steel wire hose, because of its good characteristics and has been widely used, we will do the following detailed introduction.Food-grade hose, transparent steel wire hose, food-grade steel wire hose, the composition of the wine hose: TPU plastic embedded stainless steel wire composition, the inner and outer walls are smooth, in the delivery of food will not leave residue, the use of stainless steel wire in the case of prolonged use of the phenomenon will not appear corrosion.Food-grade steel wire hose, transp
The common materials of Plastic Hoses are as follows:The first is polyvinyl chloride (PVC). Plastic hoses made of PVC are relatively stiff, have good chemical corrosion resistance, and can resist corrosion from a variety of acidic and alkaline substances. Its cost is relatively low, so it is widely used in many common drainage and irrigation scenarios. For example, it can often be seen in the connection parts of household sewer pipes or in the irrigation systems of small farmlands.
First, the characteristics of polyethylene plastic water pipe and the use of precautionsPolyethylene plastic water pipe is a commonly used water pipe material with the following characteristics:1. light weight: compared with metal pipes, polyethylene plastic water pipe is light weight, easy to construct and install.2. good corrosion resistance: polyethylene plastic water pipe is not easy to be corroded, long service life.3. high pressure resistance: polyethylene plastic water pipe has good pressure resistance, can withstand a certain water pressure. 4.
1 - detergent cleaning method: the mixture of detergent in warm water into the plastic tube, the liquid accounted for a quarter to one-third of the volume of the tube is more appropriate, closed at both ends, shaking vigorously, large plastic pipe can be used to clean the way mechanical vibration. After 20 minutes to half an hour, release the liquid and rinse repeatedly with water.
Ningjin Rui'ao Plastic Hose Products Co., Ltd, located in Ningjin County, Dezhou City, Shandong Province, is a manufacturer of polyurethane series steel wire dust suction hose, ventilation hose, plastic ribbed spiral hose, chemical-resistant hose, wire protection hose, fiber-reinforced hose, PA nylon hose, etc., made from elastomers such as TPU (Polyurethane), TPV (Vulcanized Rubber), TPE (polyester), and nylon (PAL1, PAL2), etc., which reach a high level in our country, no matter in the Both in type and quantity have reached a high level in our country.