Tear-Resistant Pu Plastic Reinforced Hose-manufacture,factory,supplier from China

Article source：admin Time：2022-12-13 09:09:28The pu plastic reinforced hose is made of polyurethane material imported from Germany. pu, also known as polyurethane, is a plastic material with the best abrasion resistance. Plastic reinforced hose made of pu material is wear-resistant, hydrolysis-resistant, mould-proof and aging-resistant. Widely used for abrasive solids such as dust, powder, fibre, chips and granules, gas and liquid environments, dust removal and vacuuming workshops, industrial hoovers, paper and textile fibres.

Steel wire hose than ordinary hose, rubber hose wear-resistant more than 10 times higher, can better meet the transport requirements of various industries, with strong elastic copper-plated steel wire wrapped in the tube wall, can be retractable; wall: special top polyether type - polyurethane, about 2.5mm wall thickness; with abrasion-resistant, tear-resistant, low-temperature resistance and other characteristics, suitable for use in the high-flow rate of very abrasive grit, gravel, fine grains of unwanted glass and flakes gas And liquid environment silo conveying glass industry, wharf, steel

pu steel wire duct products are processed with special TPU embedded spiral steel wire, with wear-resistant (better than rubber 3-4 times; soft PVC 6-7 times) aging resistance, tear resistance, high transparency can be observed in the suction and conveying process, light weight, good stretch, good resilience and low-temperature compression, etc., with ultra-high strength and ultra-long service life.

With the development of industry, there are more and more products in industrial production as well as operation, these products can better connect the equipment, make the whole production become more smooth, wear-resistant pu steel wire telescopic hose is one of them.PU steel wire wear-resistant hose is mainly used in the abrasion-resistant material suction conveying, commonly used in solid particles and gas conveying, suction paper confetti, textile fibres, conveying dust and powders, also used to Protect the hose, used to resist abrasion, conveying abrasion-resistant solid particles, woodwo

Ningjin Rui'ao Plastic Hose Products Co., Ltd, located in Ningjin County, Dezhou City, Shandong Province, is a manufacturer of polyurethane series steel wire dust suction hose, ventilation hose, plastic ribbed spiral hose, chemical-resistant hose, wire protection hose, fiber-reinforced hose, PA nylon hose, etc., made from elastomers such as TPU (Polyurethane), TPV (Vulcanized Rubber), TPE (polyester), and nylon (PAL1, PAL2), etc., which reach a high level in our country, no matter in the Both in type and quantity have reached a high level in our country.

How do you cut a steel reinforced hose? The following steps and tools can be used to cut steel hose:1. Prepare tools: Angle grinder or special steel pipe cutter can be used to cut the steel bar hose. In addition, safety gloves, goggles and other personal protective equipment are required.2. Measurement mark: Use a ruler or ruler to mark the length to be cut on the steel hose to ensure accuracy.3. Fixed hose: Fix the steel hose on the workbench or a suitable fixture to ensure that it will not move during the cutting process.4.

Polyurethane hose manufacturers talk to share wear-resistant polyurethane hose how to choose? Polyurethane hose fits each other. Various mechanical equipment to inhale and transport solid particles of dust with destructive force, such as woodworking equipment dust removal, ceramic equipment raw material transport.

Many customers reflect that buy back the pu polyurethane hose is corroded, what is the reason? Let zhongwang hose editor for you to explain!pu polyurethane hose inside is by the presence of steel wire, once the steel wire disclosure, it is quickly oxidized by the air, so that the corrosion continues to expand, and ultimately the formation of holes. So, is there a way to keep the pu polyurethane hose from corrosion? We can utilize paint or oxidation-resistant metals for plating to secure the carbon steel surface, but, as is well known, this protection is only a film.

The pu polyurethane hose is a kind of pipe with hard copper-plated steel wire to decorate its wall for abrasion resistance. Pressurised manufacturing technology and vacuum resistance are adopted, which makes pu polyurethane hose have good oxidation resistance. At the same time, pu polyurethane hose can be applied to various production environments and is resistant to high temperatures, so it has a wide range of production space.

Always use plastic pu hose within the specified temperature and pressure range. When applying pressure, open/close any valves slowly to avoid shock pressure and damage to the pu-transparent hose. pu-transparent hose expands and contracts slightly in response to changes in internal pressure, so cut the pu-transparent hose to a slightly longer length than you need when using it.Use a pu hose that is suitable for the fluid being loaded.