UHMWPE Crane Outrigger-manufacture,factory,supplier from China

When we use UHMWPE pipe, we will ask the question, can this kind of pipe be connected by heat fusion?

PU Hose is widely used in many industries due to its excellent performance, including but not limited to air pipes, water pipes and material handling pipes. In order to ensure the normal use of PU Hose and extend its service life, proper maintenance and maintenance is very important.

Both Braided Hose and rubber hose have their respective applications, and the choice of the two depends on the specific application requirements.Braided Hose, usually woven with multiple or single strands of fiber, has high pressure resistance and corrosion resistance, and is developed early.

There are many types of hoses, here are some common types:Rubber hose: has good elasticity and flexibility, can adapt to a certain degree of bending and stretching. Often used to transport water, oil, gas and other media, such as automotive brake tubing and cooling water pipes.Plastic hoses: such as PVC hoses, light weight, corrosion resistance, often used in household drainage and irrigation systems.Metal hose: generally made of stainless steel and other metals, with high strength and high pressure resistance.

How Do Anti Static Hoses Work？Anti Static Hoses work primarily by preventing the buildup or conduction of static electricity through their special materials and design. Generally speaking, the working principle of anti-static hoses includes the following aspects:1. Conductive layer or wire: Anti Static Hoses usually add conductive layer or wire to their structure, these conductive elements can direct electrostatic charge to the ground to prevent the buildup of static electricity.2.

We provide you with a professional guide to cleaning PU Food Grade Hoses. To ensure the cleanliness and safety of the hose and extend its service life, please follow the steps below:First, empty the residual material in the hose, which can be blown out by natural drainage or compressed air.

Plastic Tube Extrusion Process is one of the core technologies of plastic tube production, which involves many links such as raw material preparation, extrusion, roughing, finishing and inspection. Here's a closer look at the Plastic Tube Extrusion Process:First of all, raw material preparation is the first step in the plastic pipe extrusion process. Raw materials generally include plastic resins, fillers and colorants, etc., and their ratios are required to be accurate to ensure the subsequent effectiveness and service life of plastic pipes.Next comes the extrusion process.

As a commonly used fluid conveying pipe, PVC Soft Tube has a wide range of applications and excellent performance characteristics. It uses PVC resin as the main raw material, after processing molding, has good flexibility, corrosion resistance, wear resistance and aging resistance, can meet the needs of fluid transportation in a variety of complex environments.The outer diameter, inner diameter and length of PVC Soft Tube can be customized according to actual needs, common specifications are 16mm, 20mm, 25mm and so on.

Cleaning1) Clean the hose for 20 minutes with hot water or a detergent solution at +50°C to +65°C; in any case the temperature must be above +43°C. The hose must be cleaned with hot water.This cleaning process helps to remove food residues from the hose.2) If detergent is used for cleaning, the hose must be washed again with water to ensure that any residues of detergent are removed. It is recommended that this procedureThe temperature of the hot water during the cleaning process should be between +50°C and +65°C.

Cleaning1) Wash the hose with hot water or detergent solution for 20 minutes at a temperature of +50°C to +65°C; in any case, the temperature must be higher than +43°C.This cleaning process helps to remove food residues from the hose.2) If cleaning agents are used for cleaning, the hose must be washed again with water to ensure that any residual cleaning agent is removed. It is recommended that this procedureThe temperature of the hot water during the cleaning process should be between +50℃ and +65℃.