Wire Reinforced Suction Hose-manufacture,factory,supplier from China

PVC Suction Hose is widely used in various occasions, such as home, industry and agriculture. In the home, PVC Suction Hose is often used in bathrooms, kitchens and other places to discharge sewage and clean the floor. In the industrial and agricultural fields, PVC hoses are used to transport various liquids, such as water, oil, chemicals and so on.When buying PVC Suction Hose, you need to consider the following factors:1. Size: Choose the right size according to your needs. In general, the larger the diameter of the PVC Suction Hose, the greater its flow rate.2.

Ningjin Rui'ao Plastic Hose Products Co., Ltd, located in Ningjin County, Dezhou City, Shandong Province, is a manufacturer of polyurethane series steel wire dust suction hose, ventilation hose, plastic ribbed spiral hose, chemical-resistant hose, wire protection hose, fiber-reinforced hose, PA nylon hose, etc., made from elastomers such as TPU (Polyurethane), TPV (Vulcanized Rubber), TPE (polyester), and nylon (PAL1, PAL2), etc., which reach a high level in our country, no matter in the Both in type and quantity have reached a high level in our country.

With the development of industry, there are more and more products in industrial production as well as operation, these products can better connect the equipment, make the whole production become more smooth, wear-resistant pu steel wire telescopic hose is one of them.PU steel wire wear-resistant hose is mainly used in the abrasion-resistant material suction conveying, commonly used in solid particles and gas conveying, suction paper confetti, textile fibres, conveying dust and powders, also used to Protect the hose, used to resist abrasion, conveying abrasion-resistant solid particles, woodwo

How do you cut a steel reinforced hose? The following steps and tools can be used to cut steel hose:1. Prepare tools: Angle grinder or special steel pipe cutter can be used to cut the steel bar hose. In addition, safety gloves, goggles and other personal protective equipment are required.2. Measurement mark: Use a ruler or ruler to mark the length to be cut on the steel hose to ensure accuracy.3. Fixed hose: Fix the steel hose on the workbench or a suitable fixture to ensure that it will not move during the cutting process.4.

1.PVC steel wire hose is a typical pre-built steel wire skeleton product. Generally speaking, the wall of the pipe is relatively transparent and smooth, and there is no problem of air bubbles. It is clearly visible when the fluid is conveyed; it can well resist the corrosion of acid and alkali.2. By using new reinforced material products for production, the pressure resistance and hardness of the products are well improved.

PU steel wire hose is a steel hose reinforced with spiral copper-plated steel wire, galvanised steel wire, stainless steel wire of PU material.

pu steel wire duct products are processed with special TPU embedded spiral steel wire, with wear-resistant (better than rubber 3-4 times; soft PVC 6-7 times) aging resistance, tear resistance, high transparency can be observed in the suction and conveying process, light weight, good stretch, good resilience and low-temperature compression, etc., with ultra-high strength and ultra-long service life.

Article source：admin Time：2022-12-13 09:09:28The pu plastic reinforced hose is made of polyurethane material imported from Germany. pu, also known as polyurethane, is a plastic material with the best abrasion resistance. Plastic reinforced hose made of pu material is wear-resistant, hydrolysis-resistant, mould-proof and aging-resistant. Widely used for abrasive solids such as dust, powder, fibre, chips and granules, gas and liquid environments, dust removal and vacuuming workshops, industrial hoovers, paper and textile fibres.

How to clean wire hose？If you have a wire hose that needs cleaning, you can follow these steps:Remove the wire hose and place it in a basin.Use warm water, add detergent to the water, put the wire hose in for a while to soak.During the soaking process, you can use a soft brush to carefully brush the wire hose. Gently brush the surface of the wire hose back and forth, taking care to avoid using too strong force, so as not to cause damage to the hose.

Spiral Wire Hose is a kind of hose with a special structure.1. Structure compositionIt is mainly composed of an inner hose, a spiral wire reinforcement layer and an outer protective layer. The inner hose is usually made of wear and corrosion resistant materials, such as rubber, plastic, etc., for transporting various fluid media. The spiral steel wire reinforcement layer is located between the inner hose and the outer protective layer, and is composed of spiral wound steel wire.