Air Conditioning Plastic Hose How To Replace

Air Conditioning Plastic Hose How To Replace? To replace the Air Conditioning Plastic Hose, proceed as follows:

Select the right Air Conditioning Plastic Hose: Select the right hose based on the air conditioner model and hose size, and ensure that the new hose size and model are consistent with the original hose.

Power off: Before replacing the Air Conditioning Plastic Hose, be sure to cut off the power to the air conditioner to ensure safety.

Remove the old hose: a. Remove the cover of the inner unit, and the interface of the hose is visible. b. Use a wrench or adjustable wrench to remove the screws on the connector of the old hose and separate the hose from the inner engine. Be careful when pulling out the drain pipe and avoid using brute force to prevent accidental injury.

Clean: Clean the connection between condenser and evaporator to ensure that the surface is clean and free of impurities.

Install a new hose: a. Align the new hose with the port on the internal engine and gently insert the hose into the port. b. Screw the screws into the connector and secure the new hose to the inner machine.

Check: Check whether the hose interface is firm, and then start the test to check whether there is gas leakage. 

After completing the above steps, the replacement of the Air Conditioning Plastic Hose is complete.