How to install Polyurethane Hose

The installation of the Polyurethane Hose requires following certain steps to ensure a solid and reliable connection. The following are the basic guidelines for installing the Polyurethane Hose:

1. Prepare tools and materials

First, prepare special cutting tools, quick joints, pipe clamps or bindings, cleaning supplies (such as alcohol cotton balls), and measuring tools (such as tape measures).

2. Measurement and cutting

According to the actual connection distance, use a tape measure to measure the required PU pipe length, and mark the cutting position on the pipe. Use special cutting tools to cut the pipe and ensure that the incision is straight and burr free.

3. Cleaning and inspection

Clean the cut end of the tube with an alcohol cotton ball to ensure that there is no dust or dirt. Check whether the end of the pipe is smooth. If there are burrs, polish them or cut them again.

Step 4 Connect

Insert one end of the PU tube into the nozzle of the quick connector to ensure that the insertion depth meets the requirements of the connector. Tighten the screw by hand, then tighten further with a wrench, but do not overtighten. Repeat this step to connect the other end.

5. Fixation and layout

Use pipe clamps or straps to secure the PU pipe in a proper position to prevent pipe loosening due to vibration or gravity. Arrange pipes properly to avoid excessive bending or distortion and keep pipes smooth.

6. Check and debug

Make sure all connections are secure and perform a pressure test to check for leaks. If necessary, adjust the pipe position or re-secure.

With these steps, the proper installation of the Polyurethane Hose can be ensured and the reliability and service life of the piping system can be improved.