How do you cut a steel reinforced hose

How do you cut a steel reinforced hose? The following steps and tools can be used to cut steel hose:

1. Prepare tools: Angle grinder or special steel pipe cutter can be used to cut the steel bar hose. In addition, safety gloves, goggles and other personal protective equipment are required.

2. Measurement mark: Use a ruler or ruler to mark the length to be cut on the steel hose to ensure accuracy.

3. Fixed hose: Fix the steel hose on the workbench or a suitable fixture to ensure that it will not move during the cutting process.

4. Cutting operation:

Use an Angle grinder: Insert the metal cutting sheet, start the Angle grinder, and slowly cut the steel hose along the marked line.

Use steel pipe cutter: According to the instructions of the cutter, place the steel hose in the center of the cutter, turn the handle or press the cutting lever to complete the cutting.

5. Check dressing: After cutting is completed, check whether the incision is smooth. If necessary, you can use a file or sandpaper to trim the edge to ensure that the incision is smooth and without burrs.

6. Cleaning and maintenance: Clean up the waste after cutting and keep the working area clean.

The above is the conventional steel hose cutting method, but the specific operation needs to be carried out according to the actual situation and the instructions of the tool. Be sure to pay attention to safety when cutting work, wear personal protective equipment to avoid accidental injury.